How to open the nintendo switch kickstand

The kick stand on the again of my Swap is hard pull out into place as a result of I don't have finger-nails; I maintain them extremely brief as a result of I play double and electrical bass. Anybody acquired any good suggestions or tips to drag it out? Proper now I exploit my keys to pop it out, however now the rubberized backside is beginning to get torn up.

Bummer that when you lastly get the stand out you’ll rapidly notice how ineffective it’s.

I needed to soak my Swap in bleach to get my kickstand to loosen up. My Seitch is destroyed however kickstand works fantastic now.

If you happen to don't thoughts, how is it destroyed? Did the plastic casing get torn up?

This form of labored. greatest resolution to this point no less than.

I’ve extraordinarily brief nails and have by no means had an issue opening it.

I’ve extraordinarily brief nails and have had issues opening it

I’ve common nails. My kickstand is straightforward to open, my pal's is close to unattainable to open. She didn't even know the change had one due to that.

use a guitar decide to drag it out, most likely gained't injury it as a lot as your keys

I needed to watch a YouTube video on easy methods to get it open, ha. So it isn't simply you.

Finest methodology IMO, is to show the console the wrong way up, use your thumb to push the kickstand down, and while pushing it down, use your finger to prize it open. After doing this a few instances, it loosened up slightly. It's a tricky outdated factor at first although.

This labored for me. Must be high remark.

I play bass too and have brief finger nails. I've had no downside pulling out my kickstand.

I sort of use my pointer and center finger to place stress downwards, then use my thumbnail to catch and open.

I additionally had bother with my brief nails (I chunk them). I’m a guitarist and have all the time simply used a decide! I normally have one in my pocket.

Maintain your toenails longer and use these as a substitute.

Okay, okay, truthfully the most effective factor to do would most likely be some mild surgical procedure in your Swap. Pop the kickstand off by opening it past its stopping level (will probably be fantastic, it pops proper again into place fairly simply). If you happen to look on the underside of the kickstand the place it hooks into the underside of the Swap, you'll see the one factor holding it closed are a few plastic "tooth" or nubs. You possibly can file these down simply sufficient to make it straightforward to pop open with out having it fall open by itself, perhaps? Alternative kickstands are $4, so even if you happen to fuck up it wouldn't value a lot to exchange.

The opposite possibility is the $20 charging stand which is way, a lot better than the fundamental kickstand as a result of it truly helps you to cost it whereas its standing, and it's adjustable. It's additionally $20 and its one other attachment to hold round with you, although.

Nintendo’s lastly providing an answer to one of many Swap’s greatest annoyances, however you are going to need to pay for it.

When the Tom’s Information employees collected its optimistic and detrimental ideas in regards to the Nintendo Swap for the console’s first birthday, I did not need to assume arduous about my gripe. The transportable console’s kickstand — which must be invaluable in tabletop mode — is flimsy, hard-to-open and caught in a single place.

Luckily, Nintendo’s about to supply an answer. Because the firm cannot simply ask folks to ship of their Switches for restore, Nintendo has introduced its Adjustable Charging Stand for Nintendo Swap. Out there beginning July 13 for $20, this pint-sized cradle seems to be like the proper resolution to my gripes.

Personally, I keep away from utilizing the prevailing kickstand on my Swap as a result of it is downright hard-to-open, to the purpose the place I’ve to power a bank card, or different skinny object into its crevice to open it. A few of my colleagues have proven me that not all Swap kickstands are arduous to open, however studies on-line (posted round launch time) say I am not alone. Additionally, I acquired my Swap final December, so it is not like Nintendo labored by way of this situation.

However even when you open the kickstand, that skinny flimsy piece of rubber feels unreliable, as if it might snap off at any given second. Additionally, because it’s fairly skinny, it would not take greater than a mere gust of air to knock it over.

Not solely does its USB Sort-C port allow charging whenever you’re on the go, its easel-like design options its personal kickstand, which you’ll transfer between a number of angles. Hopefully, that is the reply to those that — myself included — forgoes even attempting to open the Swap’s inside kickstand.

I will have to attend till Tom’s Information will get one among these stands in-house to check out, although, earlier than I may be certain that is the proper resolution. Hopefully, the stand’s again leg is straightforward to regulate, since this can be a standalone product.

Whereas Nintendo’s beforehand given its Formally Licensed stamp of approval to a Swap stand from Hori, which prices a less expensive $12.99, I all the time had my doubts about it. Not solely am I unfamiliar with the Hori model, however its design is extra cumbersome; you progress the stand leg between a sequence of ridges to regulate its place.

Comparatively, the upcoming Nintendo stand seems to be fairly compact, which I will most likely desire when packing the transportable console for journeys. Nintendo’s Adjustable Charging Stand is not accessible for pre-order but, however we’ll let you recognize what we consider it as soon as we strive it out.

Henry is an editor author at Tom’s Information protecting streaming media, laptops and Apple. Previous to becoming a member of Tom’s Information — the place he is the self-described Uncommon Oreo Skilled — he reviewed software program and {hardware} for TechRadar Professional, and interviewed artists for Patek Philippe Worldwide Journal. Yow will discover him at your native professional wrestling occasions, and in search of the headphone adapter that he unplugged from his iPhone.

It has been virtually fully universally agreed upon that the kickstand on the again of the Nintendo Swap has left a bit to be desired. Sure, it does the job for probably the most half, however it additionally feels flimsy and simply would not meet the identical excessive commonplace that the remainder of the system provides. If you happen to do not just like the kickstand in your Nintendo Swap, or if you happen to occurred to interrupt off that little piece of plastic unintentionally, there are some choices accessible to you.

How to open the nintendo switch kickstand

Cost whilst you sit back : Adjustable charging stand

In case you are seeking to change your kickstand, why not get a substitute that may do extra? This official charging stand is so much sturdier than the inventory possibility, and it is adjustable, so you’ll be able to have totally different angles.

  • $20 at Finest Purchase
  • $20 at Amazon
  • $20 at WalMart

How to open the nintendo switch kickstand

Extra of the identical : Swap Kickstand Alternative

When you’ve got no downside with the inventory kickstand and simply want a substitute, you’ll be able to all the time decide one up by way of Nintendo. It isn’t flashy, however it will get the job achieved.

  • $12 at Amazon
  • $Four at Nintendo

How to open the nintendo switch kickstand

All of the angles : Hori Compact Playstand

If you happen to do not want a docking stand, you’ll be able to all the time go for this formally licensed stand from Hori. It is extra sturdy than the default kickstand, it provides totally different angles, and it raises the Swap up so you will get to the charging port whilst you play.

  • $13 at Amazon
  • $13 at WalMart

How to open the nintendo switch kickstand

Traditional with shade : Nyko substitute kickstand

In case you are in search of a substitute like the unique kickstand, you can all the time go for this Nyko stand. It provides a bit extra flash than the usual. These stands are available in three totally different colours and have a built-in spot to retailer further SD playing cards.

How to open the nintendo switch kickstand

For the helpful gamer : eXtremeRate Smooth Contact Grip White Console Again Plate

Taking off the complete backplate of the Nintendo Swap would not appear scary to some who’re skilled with taking issues aside and placing them again collectively. For these keen to place an entire new plate on their Swap, this again provides the system a completely new look whereas additionally offering a brand new kickstand. However you will need to bear in mind this can void any guarantee you may have in your system.

Stand by your kickstand

There are many choices in terms of changing the kickstand in your Nintendo Swap. Simply discover the one which’s best for you and go for it. I personally use the Adjustable Charging Stand. For less than $20, you get an official Nintendo product that works a lot better than the inventory stand, and it additionally retains your Swap charged.

Altering the kickstand might not be for everybody. However, if you happen to simply need your kickstand to look the way it did model new, then the Swap Kickstand Alternative is for you. It comes from Nintendo, and it is fairly reasonably priced! A easy repair to make your Swap appear to be new. Nonetheless you determine to vary it up (or not), we all know there is a sure consolation in with the ability to reliably prop up your console and play your favourite Swap video games from wherever whilst you kickback.

We could earn a fee for purchases utilizing our hyperlinks. Be taught extra.

How to open the nintendo switch kickstand

Problem your mates in the most effective Mario sports activities video games!

Looking for the proper Mario sports activities recreation? Look no additional! From kart racing to tennis, you may you’ll want to discover a recreation that fits your sports activities wants.

How to open the nintendo switch kickstand

Are these video games in your 3DS assortment? Listed below are among the greatest.

The Nintendo 3DS is a handheld console that has been round for fairly some time. Check out the most effective video games accessible on this method!

How to open the nintendo switch kickstand

What video games can children play on the Swap which might be enjoyable and secure?

In search of video games you’ll be able to hand off to your children with out worrying about dangerous on-line interactions or grownup content material? Listed below are some excellent ones to strive!

How to open the nintendo switch kickstand

Do you know that the Nintendo Swap simply celebrated its fourth birthday? Nicely, it did! The console was launched on March 3, 2017, and is Nintendo’s first console that was designed as a hybrid unit. The Swap is exclusive in that it may be performed in both handheld mode or docked on a tv.

Nicely, there’s a third mode: table-top. The console was designed with a built-in kickstand that covers the Micro SD card slot. The kickstand is extraordinarily flimsy and might fall off simply. Over time, the kickstand will fall off way more simply. Luckily, there’s a quite simple resolution, so permit me to supply directions.

Before everything, that you must take away the kickstand. By this level, that shouldn’t be a troublesome job. The kickstand on my Swap popped off simply by extending it past its pure circulation (like a wishbone). In reality, I did a video about this problem, which is posted under.

How to open the nintendo switch kickstand

It would be best to use a Y-head screwdriver (Y000). I do know within the video I discussed that the screw was triangular, however that was attributable to my poor imaginative and prescient. Upon nice magnification, it’s the truth is “Y-shaped,” and the Y000 head is ideal. Personally, I’ve the iFixit package which I bought on Amazon for about $60.

After you have the fitting instrument to make use of, all that you must do is take away the small, metallic screw and bend the ears of the aluminum piece outward. Place the small, metallic piece again in its housing and tighten the screw. Push the kickstand again in place and you might be achieved. It is best to instantly discover that the kickstand is now tighter.

Hopefully, this fast little information and my added video under will help you along with your Nintendo Swap kickstand. Tell us within the feedback if you happen to discovered this info useful!

Have to develop your Nintendo Swap storage capability rapidly and simply? Right here's you are able to do so with a Micro SD card.

on September 28, 2021 at 11:20AM PDT

The Nintendo Swap is a unbelievable console for taking part in video games at dwelling or on the street because of its hybrid nature, however having a big library of titles to dip into will rapidly exhaust the console’s inside storage. With simply 32 gigabytes of area on the common Swap and Swap Lite fashions, and 64 GB on the Swap OLED Mannequin, digital actual property is at a premium on these gadgets. Luckily, that tight gaming squeeze may be expanded with a micro SD card, storage gadgets that now supply a whole lot of additional gigabytes of area with out breaking your financial institution steadiness.

It is properly price investing in a micro SD card, and if you happen to’re seeking to pop one into your Nintendo Swap, here is how you are able to do it. We suggest SanDisk Extremely microSD playing cards, as they provide nice efficiency and reliability at an affordable value.

The right way to insert a microSD card into your Nintendo Swap

Make sure that your Swap is powered down, after which flip it over. Search for the kickstand, which may be discovered on the left.

How to open the nintendo switch kickstand

Elevate the kickstand up, utilizing your nail or a small flat object inserted into the hole on the backside.

How to open the nintendo switch kickstand

Now that the stand has been lifted, you may discover the SD card slot open and ready.

How to open the nintendo switch kickstand

To line the microSD card up correctly, make sure the face of it’s going through you, whereas its integral uncovered metallic half is on the rear.

How to open the nintendo switch kickstand

Slide it in, and as soon as you are feeling it click on into place, you are good to go. Push the kickstand again down and switch your Swap again on.

The right way to insert a microSD card into your Nintendo Swap Lite

In contrast to the common Swap, the Swap Lite’s microSD card port may be discovered on the backside of the fitting facet of the controller. Merely flick the protecting cowl over, insert the microSD card with the metallic connectors going through you, and press down till you are feeling it click on into place.

To unlock some area in your Swap, now you can go to Knowledge Administration in your settings display, and switch video games over to the brand new microSD card.

How to open the nintendo switch kickstand

If you happen to’ve used your Nintendo Swap propped up with the prevailing kickstand, you recognize that it’s not the most effective resolution. I imply, it’s nice that Nintendo included one, however it’s the standard isn’t wonderful. Each time I exploit mine, I’m anxious that it’ll go flying if I enthusiastically swat the Pleasure-Cons into the desk, or if somebody walks previous and shakes the ground.

It’s additionally fairly flimsy, and whereas I haven’t damaged mine but, I’m certain it’ll occur. There’s any variety of replacements for that kickstand although, from straight swaps to docks or stands that add extra performance. Listed below are a few of our favorites.

So, what are the most effective choices to complement that anemic Nintendo Swap kickstand?

Would you like an aesthetic substitute for the kickstand that’s already in your console, or do you wish to bypass it fully so that you get a greater stand? How a lot do you wish to spend? Do that you must change the prevailing inventory Nintendo one as a result of it acquired broken? We’ll present you our favourite kickstand replacements for the Nintendo Swap.

AboveTEK Lengthy Arm Aluminum Pill Stand ($54)

How to open the nintendo switch kickstand

Okay, this isn’t truly marketed at Swap homeowners however hear me out. It’s adjustable in each peak and the way far it sits out of your face, providing you with all of the area under your pill to carry a controller. Isn’t that nice? Now your Nintendo Swap may be excessive sufficient so that you’re not craning your neck whereas it’s stood up. It’s constructed for much larger tablets as properly, so it gained’t shift place, dumping your valuable Swap to the bottom.

Camide Dock for Nintendo Swap ($24)

How to open the nintendo switch kickstand

Why accept merely standing your Swap up when you can be recharging it on the similar time? The Camide dock is suitable with the PD spec your Swap makes use of to cost, so that you don’t have to fret in regards to the bricking situation of some third-party docks. In contrast to the official dock, there’s nothing obstructing the display so you’ll be able to play on the Swap’s display if you happen to desire, excellent if another person is utilizing the TV.

Nyko Kick Stand Multi-Pak ($13)

How to open the nintendo switch kickstand

Need an inexpensive substitute for the kickstand that’ll additionally retailer a microSD card? Nyko has you coated, with this three-pack of coloured kickstands to exchange the one your console got here with. Every has a helpful slot to retailer a further microSD card, helpful you probably have your video games on a number of storage playing cards attributable to area limitations.

eXtremeRate Smooth Contact again plate substitute ($19)

How to open the nintendo switch kickstand

If you happen to’re courageous sufficient to exchange the kickstand, why cease there? You possibly can decorate the complete again panel in one among ten colours, making your console actually yours. You’ll need to put the unique again on if you happen to want a restore doing, however you’ll be a professional at swapping the again panel by then.

HORI Compact Playstand ($13)

How to open the nintendo switch kickstand

This formally licensed stand leaves the charging port open, so you’ll be able to cost whereas taking part in. You possibly can alter the angle, and it’ll fold flat for storage or transportation, so you’ll be able to all the time have it in your bag for whenever you wish to play. Oh, and it’s acquired rubber grips to maintain your Swap steady whereas it’s on.

There ya go, some good choices for changing that kickstand in your Nintendo Swap. Hopefully, that now means you don’t need to threat your console sliding over if somebody bumps the desk it’s on.

Editors’ Suggestions:

  • The very best iOS and Android video games to obtain in August 2020
  • The very best Nintendo Swap equipment you should purchase – 2020 version
  • The 5 greatest board video games you’ll be able to play on Steam
  • Listed below are the most effective smartwatches in the marketplace proper now

Only a heads up, if you happen to purchase one thing by way of our hyperlinks, we could get a small share of the sale. It’s one of many methods we maintain the lights on right here. Click on right here for extra.

This text describes easy methods to set up an SD card in your Nintendo Swap. One of many greatest issues with Nintendo Swap is that it has solely 32GB of inside storage. Particularly if you happen to obtain quite a lot of video games and downloadable content material from the Nintendo eShop, the storage capability shouldn’t be very giant.

You possibly can develop the space for storing of Nintendo Swap by putting in a microSD card. You could format the SD card to be used solely with Nintendo Swap.

Flip off the Nintendo Swap. To show off the Nintendo Swap, press the facility button subsequent to the quantity buttons on the high of the Nintendo Swap. There’s an icon with a circle and a line.

Flip the Nintendo Swap over. If you happen to haven’t achieved so already, take away the Nintendo Swap from the dock and switch it the wrong way up. Open the kickstand.

The kickstand is a small plastic strip on the again of the Nintendo Swap. Open from the underside of the Nintendo Swap. Possibly that you must skinny your fingernails or one thing to open it. There’s a micro SD slot underneath the kickstand. Insert the micro SD card.

Insert the microSD card into the SD card slot with the label going through up and the lengthy facet going through left. Nintendo Swap helps commonplace Micro SD (as much as 2GB), Micro SDHC (2-32GB), and Micro SDXC (64GB and above). For the most effective gaming expertise, purchase an SD card that’s UHS-1 (Extremely Excessive Pace ​​Part 1) compliant and has a switch price of 60MB / s or greater.

Activate the console. Insert a clean SD card and extra space for storing shall be accessible instantly. To verify this, choose the gear icon (System Settings), then choose Knowledge Administration. The accessible space for storing on the micro SD card within the higher proper nook is displayed. If you happen to insert a microSD card with information, you may be prompted to format the microSD. Choose Format and observe the directions to format the micro SD card.

Make a backup of the whole lot you wish to maintain, as all the information on the micro SD card shall be misplaced. If you happen to set up a micro SDXC card, you might be requested to replace your system to make use of the micro SD card. If that’s the case, faucet System Replace within the pop-up window and observe the directions to replace your system.

64 GB simply isn’t sufficient for right this moment’s video games.

How to open the nintendo switch kickstand

After 4 years of dominating the hand held gaming market with the unique Nintendo Swap, Nintendo lastly launched an improve. The Nintendo Swap OLED model was launched in October 2021, and it options a few good enhancements.

The obvious enchancment is the display. This time round, Nintendo went with a 7″ OLED display for 720p gaming. It’s not the 4K display that some have been anticipating, however it’s undoubtedly an enchancment.

Nintendo additionally went with slightly extra storage this time round. As a substitute of getting 32 GB of inside storage, the OLED model doubles as much as 64 GB of storage with the OLED model. However with right this moment’s video games, 64 GB nonetheless gained’t get you very far.

Add an SD card to develop storage on the Nintendo Swap OLED model

Luckily, there’s a method you’ll be able to develop the storage on the Swap OLED model. Identical to with the unique model of the Swap, the OLED model has a slot the place you’ll be able to add an SD card to extend your storage tremendously. Right here’s what that you must do:

Ensure that your Swap is powered off

Open the kickstand and slide the microSD card in till it clicks into place

How to open the nintendo switch kickstand

Energy the console again on

When you’ve accomplished these steps, you’ll be good to go. From there, you’ll be able to entry your machine’s system settings and see the extra storage drive that you simply’ve added.

All that you must improve the storage in your Nintendo Swap OLED model is a microSD card like this one, and also you’re able to retailer all types of recent video games in your system.

Have any ideas on this? Tell us down under within the feedback or carry the dialogue over to our Twitter or Fb.

Editors’ Suggestions:

  • How a lot storage comes with the Nintendo Swap OLED model?
  • Does the Nintendo Swap OLED have Bluetooth?
  • Does the Nintendo Swap have an ethernet port?
  • Don’t peel off the protecting cowl in your OLED Swap’s glass display

Only a heads up, if you happen to purchase one thing by way of our hyperlinks, we could get a small share of the sale. It’s one of many methods we maintain the lights on right here. Click on right here for extra.

Comply with this information to exchange a cracked or broken rear panel on the Nintendo Swap.

Notice: This information, and the half we promote, are suitable with the unique Nintendo Swap mannequin launched in 2017, in addition to the newer refreshed mannequin launched in 2019 (mannequin numbers HAC-001 and HAC-001(-01), respectively).


Tri-point Y00 Screwdriver

JIS #000 Screwdriver


Nintendo Swap Rear Panel

Шаг 1 Launch the Pleasure Con controller locking tabs

Earlier than you start this restore, be sure the machine is totally powered off.

Press and maintain down the small spherical button on the again of the Pleasure Con controller.

Whilst you maintain down the button, slide the controller upward.

Шаг 2 Take away the Pleasure Con controllers

Proceed sliding the controller upward till it is fully faraway from the console.

Repeat this similar course of for the opposite controller.

Шаг 3 Take away the back-side screws

Use a Y00 screwdriver to take away the 4 6.Three mm-long screws securing the rear panel.

All through this restore, maintain monitor of every screw and ensure it goes again precisely the place it got here from.

Шаг 4 Take away the highest and backside screws

Use a JIS 000 screwdriver to take away the next screws securing the rear panel:

One 2.5 mm-long screw on the highest fringe of the machine

Two 2.5 mm-long screws on the underside fringe of the machine

Шаг 5

Use a JIS 000 screwdriver to take away the 2 3.Eight mm middle screws on the edges of the machine (one on either side).

Шаг 6

Use your finger to flip up the kickstand on the again of the machine.

If there is a microSD card within the microSD card slot, take away it now earlier than you proceed to the following step.

Шаг 7

Use a JIS 000 screwdriver to take away the 1.6 mm screw within the kickstand properly.

Shut the kickstand.

Шаг 8

Open the sport card cartridge flap.

The sport card cartridge flap attaches to the opposite half of the plastic shell, stopping you from fully lifting up the rear panel if it is closed.

Elevate the rear panel up from the underside of the machine and take away it.

Examine your new substitute half to the unique half. You could must switch remaining elements from the brand new half earlier than putting in.

To reassemble your machine, observe these directions in reverse order.

Restore didn’t go as deliberate? Strive some fundamental troubleshooting, or ask our Nintendo Swap Solutions group for assist.

Examine your new substitute half to the unique half. You could must switch remaining elements from the brand new half earlier than putting in.

To reassemble your machine, observe these directions in reverse order.

Restore didn’t go as deliberate? Strive some fundamental troubleshooting, or ask our Nintendo Swap Solutions group for assist.

45 участников успешно повторили данное руководство.


Craig Lloyd

Участник с: 10.02.2016

19 689 Репутация

Автор 82 руководств


iFixit Участник iFixit

Автор 16 707 руководств

Комментариев: 6

Wonderful and concise information.

The brand new panel doesn’t include the sticky grille items x 2 on the underside. Is it presupposed to be a straight switch between the outdated and the brand new?

Simply did this substitute and there are some things to remember that this evaluation doesn’t point out. There are x2 sq. foam items that may be transferred to the brand new panel positioned on the backside bottom of the outdated. Additionally, the sport cartridge protect {hardware} and the kickstand holder {hardware} need to be taken off the again of the outdated panel and transferred to the brand new panel. The kickstand has 2 Phillips #000 screws and the sport cartridge protect has 1 Phillips #000 screw

How do you switch the froth items? Use some warmth to loosen their adhesive after which take away them and switch over the brand new backplate?

Is the casing the identical between the HAC mannequin and the HAD mannequin? This information doesn’t specify

I’m utilizing iFixit Professional instrument package. What to do if one of many 000 screw’s cap seems to be stripped off? The right way to extract it if perchance?